,

HNE Lever Switch

Cross Lever Limit Switch LightXCross LX® is used for the safe limitation of cross- and long travels on an EOT cranes.

Read more
,

SNE Spindle Gear

Main Current Limit Switches for direct switching of three-phase-motors. Available as spindle, lever and countwerweight version.

Read more
,

GHNE Counterweight Switch

Main Current Limit Switches for direct switching of three-phase-motors. Available as spindle, lever and countwerweight version.

Read more
,

LX PBT Synthetic Housing

Cross Lever Limit Switch LightXCross LX® is used for the safe limitation of cross- and long travels on an EOT cranes.

Read more
,

HEG Spur Gear Geared Cam Limit Switches

HEG Geared Cam Limit Switches for gear ratios from <1 up to 9. Installation of up to 8 contacts possible. With high protection rate IP 65 like HGE for rough environments.

Read more
,

HGE Worm Gear Geared Cam Limit Switches

HGE Geared Cam Limit Switches offer the possibility up to 16 contacts and also the possibility to drive Incremental or absolute encoders driven by the second shaft end of the limit switch. Due to the design with the contacts installed inside the cover on the left, on the right or both sides it offers the advantage especially for tight installations in axial direction.

Read more
,

HHEV Lever Switch

Lever Cam Switch. Actuation to both sides possible, mechanical limits at +/- 85°

Read more
,

Series 100 ATEX Geared Cam Limit Switches

Series 100 ATEX Geared Cam Limit Switches are for application in potential explosive atmoshere. Available for use in zones 1,2,21 and 22

Read more
,

Series 110 Geared Cam Limit Switches

Series 110 Geared Cam Limit Switches with dry running moulded gears (acetyl copolymer). Microswitches as snap or push button, normally closed and normally open contacts with positive, also form-fit opening operation. Switching point intervals adjustable infinitely or in 4° steps within the usable revolution range. Any installed position.

Read more
,

Series 100/110 Cast Iron Spur Geared Cam Limit Switches

Series 100/110 Spur Geared Cam Limit Switches are robust limit switches in a metal or polycarbonate housing for use under difficult, mechanical conditions like offshore application or steel works . Especially for the series 100.

Read more
,

Series 100/110 Spur Geared Cam Limit Switches

Series 100/110 Spur Geared Cam Limit Switches are robust limit switches in a metal or polycarbonate housing for use under difficult, mechanical conditions like offshore application or steel works . Especially for the series 100.

Read more
,

Light Cam® Compact Geared Cam Limit Switch

Light Cam® Compact is a compact Geared Cam Limit Switch offering same functionality as the Light Cam® in a smaller housing.

Read more
,

LCM Series Light Cam® Geared Cam Limit Switches

Series Light Cam® Geared Cam Limit Switches are universal, mechanical switchgear that can map a wide range of input shaft rotations over the full angular displacement of the cam discs. These cam plates actuate the switching contacts. The classical applications of these Geared Cam Limit Switches are e.g. crane hoist, travelling, and slewing drives; wind turbine generator systems; etc.

Read more
,

LC Series Light Cam® Geared Cam Limit Switches

Series Light Cam® Series Geared Cam Limit Switches are universal, mechanical switchgear that can map a wide range of input shaft rotations over the full angular displacement of the cam discs. These cam plates actuate the switching contacts. The classical applications of these Geared Cam Limit Switches are e.g. crane hoist, travelling, and slewing drives; wind turbine generator systems; etc.

Read more
,

ATEX MH Geared Cam Limit Switch

Series 51 ATEX Geared Cam Limit Switches are for application in potential explosive atmosphere. In the IP65 aluminium housing necessary adaptations have been done to fulfill the requirement for zone 21 and 22.

Read more
,

CxZ Geared Cam Limit Switches

Series 51 Geared Cam Limit Switches can map a wide range of shaft rotations to the angular displacements of the installed cam discs. These cam discs actuate electro-mechanical switches. They are used where angles or distances cannot be limited directly by switchgear, but only indirectly on the basis of the measured angle of rotation. A classical example of this application involves limiting the hook lift of a crane hoist.

Read more