Ecoglo Aluminum 2" Wide Step Edge Guidance Strip (Grey Contrast) ILUM-E4051-481
ILUM-E4051-481 Contrast strip with high performance photoluminescence and Yellow non-slip. (2" x Custom Length)
Ecoglo Aluminum 2" Wide Step Edge Guidance Strip (Grey Contrast) ILUM-E4051-361
ILUM-E4051-361 Contrast strip with high performance photoluminescence and Yellow non-slip. (2" x Custom Length)
Ecoglo Aluminum 2" Wide Step Edge Guidance Strip (Grey Contrast) ILUM-E4051-241
ILUM-E4051-241 Contrast strip with high performance photoluminescence and Yellow non-slip. (2" x Custom Length)
Ecoglo Aluminum 2" Wide Step Edge Guidance Strip (Grey Contrast) ILUM-E3061
ILUM-E3061 Photoluminescent Step Edge Marking - Ecoglo Aluminum 2" Wide Step Edge Guidance Strip (Grey Contrast) Extruded aluminum photoluminescent step edge stripe combines long lasting glow with durable contrasting non-skid. IBC / IFC Code Compliant From right here in New England to every corner of the Globe. Ecoglo products have been keeping facilities safe for over 20 years. Designed for durability, functionality, and compliance to reduce slip and falls and help people get out of facilities safely in any type of emergency. Ecoglo offers widest selection of Code Compliant Photoluminescent Egress and Safety products for the architectural and building trades. Available in custom lengths upon request.
ECOGLO 1" wide Aluminum Platform Perimeter Strips ILUM-G5001-CST-LNG
ILUM-G5001-CST-LNG Ecoglo's G5001 aluminum platform perimeter strips is 1" wide and provides excellent visibility and enhance egress speed in all light conditions. The G5001 is ideal for areas required by code to have luminous path markings. The G5001 is UL 1994 listed and meets the requirements of building codes (IBC), fire codes (IFC), and life safety (NFPA) codes across North America and around the world. The G5001 is applied at the perimeter (wall or floor) of all stairwell landings and along egress pathways leading to final exits. The G-Series is applied using Bostik 915 urethane adhesive. Available in up to 7' lengths for standard shipping via UPS Ground. Available in 10' lengths for larger quantities shipped via FEDEX Freight. Additional shipping and handling charges apply.
ECOGLO 1" wide Aluminum Platform Perimeter Strips ILUM-G5001-84
ILUM-G5001-84 Ecoglo's G5001 aluminum platform perimeter strips is 1" wide and provides excellent visibility and enhance egress speed in all light conditions. The G5001 is ideal for areas required by code to have luminous path markings. The G5001 is UL 1994 listed and meets the requirements of building codes (IBC), fire codes (IFC), and life safety (NFPA) codes across North America and around the world. The G5001 is applied at the perimeter (wall or floor) of all stairwell landings and along egress pathways leading to final exits. The G-Series is applied using Bostik 915 urethane adhesive. Available in up to 7' lengths for standard shipping via UPS Ground. Available in 10' lengths for larger quantities shipped via FEDEX Freight. Additional shipping and handling charges apply.
ECOGLO 1" wide Aluminum Platform Perimeter Strips ILUM-G5001-72
ILUM-G5001-72 Ecoglo's G5001 aluminum platform perimeter strips is 1" wide and provides excellent visibility and enhance egress speed in all light conditions. The G5001 is ideal for areas required by code to have luminous path markings. The G5001 is UL 1994 listed and meets the requirements of building codes (IBC), fire codes (IFC), and life safety (NFPA) codes across North America and around the world. The G5001 is applied at the perimeter (wall or floor) of all stairwell landings and along egress pathways leading to final exits. The G-Series is applied using Bostik 915 urethane adhesive. Available in up to 7' lengths for standard shipping via UPS Ground. Available in 10' lengths for larger quantities shipped via FEDEX Freight. Additional shipping and handling charges apply.
ECOGLO 1" wide Aluminum Platform Perimeter Strips ILUM-G5001-60
ILUM-G5001-60 Ecoglo's G5001 aluminum platform perimeter strips is 1" wide and provides excellent visibility and enhance egress speed in all light conditions. The G5001 is ideal for areas required by code to have luminous path markings. The G5001 is UL 1994 listed and meets the requirements of building codes (IBC), fire codes (IFC), and life safety (NFPA) codes across North America and around the world. The G5001 is applied at the perimeter (wall or floor) of all stairwell landings and along egress pathways leading to final exits. The G-Series is applied using Bostik 915 urethane adhesive. Available in up to 7' lengths for standard shipping via UPS Ground. Available in 10' lengths for larger quantities shipped via FEDEX Freight. Additional shipping and handling charges apply.
ECOGLO 1" wide Aluminum Platform Perimeter Strips ILUM-G5001-48
ILUM-G5001-48 Ecoglo's G5001 aluminum platform perimeter strips is 1" wide and provides excellent visibility and enhance egress speed in all light conditions. The G5001 is ideal for areas required by code to have luminous path markings. The G5001 is UL 1994 listed and meets the requirements of building codes (IBC), fire codes (IFC), and life safety (NFPA) codes across North America and around the world. The G5001 is applied at the perimeter (wall or floor) of all stairwell landings and along egress pathways leading to final exits. The G-Series is applied using Bostik 915 urethane adhesive. Available in up to 7' lengths for standard shipping via UPS Ground. Available in 10' lengths for larger quantities shipped via FEDEX Freight. Additional shipping and handling charges apply.
ECOGLO 1" wide Aluminum Platform Perimeter Strips ILUM-G5001-36
ILUM-G5001-36 Ecoglo's G5001 aluminum platform perimeter strips is 1" wide and provides excellent visibility and enhance egress speed in all light conditions. The G5001 is ideal for areas required by code to have luminous path markings. The G5001 is UL 1994 listed and meets the requirements of building codes (IBC), fire codes (IFC), and life safety (NFPA) codes across North America and around the world. The G5001 is applied at the perimeter (wall or floor) of all stairwell landings and along egress pathways leading to final exits. The G-Series is applied using Bostik 915 urethane adhesive. Available in up to 7' lengths for standard shipping via UPS Ground. Available in 10' lengths for larger quantities shipped via FEDEX Freight. Additional shipping and handling charges apply.
ECOGLO 1" wide Aluminum Platform Perimeter Strips ILUM-G5001-24
ILUM-G5001-24 Ecoglo's G5001 aluminum platform perimeter strips is 1" wide and provides excellent visibility and enhance egress speed in all light conditions. The G5001 is ideal for areas required by code to have luminous path markings. The G5001 is UL 1994 listed and meets the requirements of building codes (IBC), fire codes (IFC), and life safety (NFPA) codes across North America and around the world. The G5001 is applied at the perimeter (wall or floor) of all stairwell landings and along egress pathways leading to final exits. The G-Series is applied using Bostik 915 urethane adhesive. Available in up to 7' lengths for standard shipping via UPS Ground. Available in 10' lengths for larger quantities shipped via FEDEX Freight. Additional shipping and handling charges apply.
ECOGLO 1" wide Aluminum Platform Perimeter Strips G5001
ILUM-G5001 Ecoglo's G5001 aluminum platform perimeter strips is 1" wide and provides excellent visibility and enhance egress speed in all light conditions. The G5001 is ideal for areas required by code to have luminous path markings. The G5001 is UL 1994 listed and meets the requirements of building codes (IBC), fire codes (IFC), and life safety (NFPA) codes across North America and around the world. The G5001 is applied at the perimeter (wall or floor) of all stairwell landings and along egress pathways leading to final exits. The G-Series is applied using Bostik 915 urethane adhesive. Available in up to 7' lengths for standard shipping via UPS Ground. Available in 10' lengths for larger quantities shipped via FEDEX Freight. Additional shipping and handling charges apply.
ECOGLO 0.6" Aluminum Photoluminescent Landing and Floor Marking Strips ILUM-G3001-CST
ILUM-G3001-CST Ecoglo 0.6" wide aluminum landing perimeter markings are UL 1994 compliant and are mounted at perimeters of stair landings and egress pathways. Available in 7' length for standard UPS Shipping. 10' lengths available for larger quantities. Fedex Freight rates apply. IBC/IFC 2015 Section 1025 Code Requirements Perimeter demarcation lines Stair landings and other floor areas within interior exit stairways, interior exit ramps and exit passageways, with the exception of the sides of steps, shall be provided with solid and continuous demarcation lines on the floor or on the walls or a combination of both. The stripes shall be 1 to 2 inches (25 mm to 51 mm) wide with interruptions not exceeding 4 inches (102 mm). Exception: The minimum width of 1 inch (25 mm) shall not apply to outlining stripes listed in accordance with UL 1994. 1025.2.4.1 Floor-mounted demarcation lines. Perimeter demarcation lines shall be placed within 4 inches (102 mm) of the wall and shall extend to within 2 inches (51 mm) of the markings on the leading edge of landings. The demarcation lines shall continue across the floor in front of all doors. Exception: Demarcation lines shall not extend in front of exit discharge doors that lead out of an exit and through which occupants must travel to complete the exit path. 1025.2.4.2 Wall-mounted demarcation lines. Perimeter demarcation lines shall be placed on the wall with the bottom edge of the stripe not more than 4 inches (102 mm) above the finished floor. At the top or bottom of the stairs, demarcation lines shall drop vertically to the floor within 2 inches (51 mm) of the step or landing edge. Demarcation lines on walls shall transition vertically to the floor and then extend across the floor where a line on the floor is the only practical method of outlining the path. Where the wall line is broken by a door, demarcation lines on walls shall continue across the face of the door or transition to the floor and extend across the floor in front of such door. Exception : Demarcation lines shall not extend in front of exit discharge doors that lead out of an exit and through which occupants must travel to complete the exit path.
ECOGLO 0.6" Aluminum Photoluminescent Landing and Floor Marking Strips ILUM-G3001-84
ILUM-G3001-84 Ecoglo 0.6" wide aluminum landing perimeter markings are UL 1994 compliant and are mounted at perimeters of stair landings and egress pathways. Available in 7' length for standard UPS Shipping. 10' lengths available for larger quantities. Fedex Freight rates apply. IBC/IFC 2015 Section 1025 Code Requirements Perimeter demarcation lines Stair landings and other floor areas within interior exit stairways, interior exit ramps and exit passageways, with the exception of the sides of steps, shall be provided with solid and continuous demarcation lines on the floor or on the walls or a combination of both. The stripes shall be 1 to 2 inches (25 mm to 51 mm) wide with interruptions not exceeding 4 inches (102 mm). Exception: The minimum width of 1 inch (25 mm) shall not apply to outlining stripes listed in accordance with UL 1994. 1025.2.4.1 Floor-mounted demarcation lines. Perimeter demarcation lines shall be placed within 4 inches (102 mm) of the wall and shall extend to within 2 inches (51 mm) of the markings on the leading edge of landings. The demarcation lines shall continue across the floor in front of all doors. Exception: Demarcation lines shall not extend in front of exit discharge doors that lead out of an exit and through which occupants must travel to complete the exit path. 1025.2.4.2 Wall-mounted demarcation lines. Perimeter demarcation lines shall be placed on the wall with the bottom edge of the stripe not more than 4 inches (102 mm) above the finished floor. At the top or bottom of the stairs, demarcation lines shall drop vertically to the floor within 2 inches (51 mm) of the step or landing edge. Demarcation lines on walls shall transition vertically to the floor and then extend across the floor where a line on the floor is the only practical method of outlining the path. Where the wall line is broken by a door, demarcation lines on walls shall continue across the face of the door or transition to the floor and extend across the floor in front of such door. Exception : Demarcation lines shall not extend in front of exit discharge doors that lead out of an exit and through which occupants must travel to complete the exit path.
ECOGLO 0.6" Aluminum Photoluminescent Landing and Floor Marking Strips ILUM-G3001-72
ILUM-G3001-72 Ecoglo 0.6" wide aluminum landing perimeter markings are UL 1994 compliant and are mounted at perimeters of stair landings and egress pathways. Available in 7' length for standard UPS Shipping. 10' lengths available for larger quantities. Fedex Freight rates apply. IBC/IFC 2015 Section 1025 Code Requirements Perimeter demarcation lines Stair landings and other floor areas within interior exit stairways, interior exit ramps and exit passageways, with the exception of the sides of steps, shall be provided with solid and continuous demarcation lines on the floor or on the walls or a combination of both. The stripes shall be 1 to 2 inches (25 mm to 51 mm) wide with interruptions not exceeding 4 inches (102 mm). Exception: The minimum width of 1 inch (25 mm) shall not apply to outlining stripes listed in accordance with UL 1994. 1025.2.4.1 Floor-mounted demarcation lines. Perimeter demarcation lines shall be placed within 4 inches (102 mm) of the wall and shall extend to within 2 inches (51 mm) of the markings on the leading edge of landings. The demarcation lines shall continue across the floor in front of all doors. Exception: Demarcation lines shall not extend in front of exit discharge doors that lead out of an exit and through which occupants must travel to complete the exit path. 1025.2.4.2 Wall-mounted demarcation lines. Perimeter demarcation lines shall be placed on the wall with the bottom edge of the stripe not more than 4 inches (102 mm) above the finished floor. At the top or bottom of the stairs, demarcation lines shall drop vertically to the floor within 2 inches (51 mm) of the step or landing edge. Demarcation lines on walls shall transition vertically to the floor and then extend across the floor where a line on the floor is the only practical method of outlining the path. Where the wall line is broken by a door, demarcation lines on walls shall continue across the face of the door or transition to the floor and extend across the floor in front of such door. Exception : Demarcation lines shall not extend in front of exit discharge doors that lead out of an exit and through which occupants must travel to complete the exit path.
ECOGLO 0.6" Aluminum Photoluminescent Landing and Floor Marking Strips ILUM-G3001-60
ILUM-G3001-60 Ecoglo 0.6" wide aluminum landing perimeter markings are UL 1994 compliant and are mounted at perimeters of stair landings and egress pathways. Available in 7' length for standard UPS Shipping. 10' lengths available for larger quantities. Fedex Freight rates apply. IBC/IFC 2015 Section 1025 Code Requirements Perimeter demarcation lines Stair landings and other floor areas within interior exit stairways, interior exit ramps and exit passageways, with the exception of the sides of steps, shall be provided with solid and continuous demarcation lines on the floor or on the walls or a combination of both. The stripes shall be 1 to 2 inches (25 mm to 51 mm) wide with interruptions not exceeding 4 inches (102 mm). Exception: The minimum width of 1 inch (25 mm) shall not apply to outlining stripes listed in accordance with UL 1994. 1025.2.4.1 Floor-mounted demarcation lines. Perimeter demarcation lines shall be placed within 4 inches (102 mm) of the wall and shall extend to within 2 inches (51 mm) of the markings on the leading edge of landings. The demarcation lines shall continue across the floor in front of all doors. Exception: Demarcation lines shall not extend in front of exit discharge doors that lead out of an exit and through which occupants must travel to complete the exit path. 1025.2.4.2 Wall-mounted demarcation lines. Perimeter demarcation lines shall be placed on the wall with the bottom edge of the stripe not more than 4 inches (102 mm) above the finished floor. At the top or bottom of the stairs, demarcation lines shall drop vertically to the floor within 2 inches (51 mm) of the step or landing edge. Demarcation lines on walls shall transition vertically to the floor and then extend across the floor where a line on the floor is the only practical method of outlining the path. Where the wall line is broken by a door, demarcation lines on walls shall continue across the face of the door or transition to the floor and extend across the floor in front of such door. Exception : Demarcation lines shall not extend in front of exit discharge doors that lead out of an exit and through which occupants must travel to complete the exit path.