Waagene WPM-100 Single
Introducing the Waagene Filtration system, your ultimate solution for clean and efficient oil maintenance. With a robust warranty of 12 months, this powerhouse weighs 40 kg and boasts dimensions of 61 x 33 x 70 cm (HxWxD), making it perfect for industrial settings. Handling up to 600 litres per day with a spacious 500-litre sump, it efficiently removes particles as small as 1-3 microns, ensuring pristine oil quality. Its low power consumption of 400 watts saves energy while providing maximum performance. Compatible with both engine oil and hydraulic systems, it offers versatility and reliability. Available in 230V or 400V, this filtration system is a must-have for any workshop or factory. Upgrade your oil maintenance with Waagene Filtration today!
Waagene Purifiner TF5060C
Introducing the TF5060C by Waagene Filtration: a powerhouse for clean, pure water! With a compact design measuring 38 x 35.5 x 14 cm and weighing just 11 kg, this filtration system is a space-saving marvel. Boasting a robust 24V power supply and a rated power of 360W/15A, it delivers an impressive flow rate of 25 liters per hour, ensuring a steady supply of fresh water. Say goodbye to impurities with its efficient 1-3 mμ filter, while its maximum back pressure of 3 bar guarantees optimal performance. Perfect for homes or businesses, it effortlessly removes water through evaporation, ensuring quality hydration every time. With easy connection points and compatibility with WP50-B or WP80-B filters, installation is a breeze. Upgrade to the TF5060C today and experience water filtration at its finest!
Waagene Purifiner TS5060PMH-Mobile
This unit is widely used for Azipods, Thrusters and Sterntubes aboard ships and boats. The unit is very location-friendly and can be used on all systems where you need to collect the oil and push the oil back into the system.
Waagene Purifiner TS-Triple
This unit is widely used for Azipods, Thrusters and Sterntubes aboard ships and boats. The unit is very location-friendly and can be used on all systems where you need to collect the oil and push the oil back into the system.
Waagene Purifiner TS-Twin
This unit is widely used for Azipods, Thrusters and Sterntubes aboard ships and boats. The unit is very location-friendly and can be used on all systems where you need to collect the oil and push the oil back into the system.
Waagene Purifiner TS
Introducing the Waagene Filtration system, a powerhouse solution for your oil purification needs. With a robust warranty of 12 months, this filtration marvel ensures peace of mind while delivering exceptional performance. Weighing 45kg and compactly designed at 58 x 31 x 47 cm, it's a space-saving marvel. Boasting a capacity of 600 litres per day and the ability to handle up to 3,000 litres of oil, it's your go-to for hydraulic and lubricating oils. Versatile and efficient, it accommodates a wide range of viscosities from 32 to 320, making it a versatile choice. Say goodbye to back pressure worries with its seamless operation. Plus, with a low filter consumption requiring just 2-4 cleanings annually, maintenance is a breeze. Running on a max power consumption of 2,300 watts, it's both powerful and energy-efficient. The 3/8" BSP connectivity ensures compatibility with various setups. Upgrade your oil management game with Waagene Filtration, the epitome of reliability and performance.
Waagene Purifiner TF 5050PUH
Hydraulic systems such as presses, compactors, ro-ro equipment. This is also used mounted on IBC tank for purification of oil, such as freezer compressor oil. Or other places where permanent assembly of the unit is not possible, two sets of oil are present. One in use and one for cleaning, and just switch on these two as needed.
Waagene Purifiner TF
Hydraulic systems such as presses, compactors, ro-ro equipment. This is also used mounted on IBC tank for purification of oil, such as freezer compressor oil. Or other places where permanent assembly of the unit is not possible, two sets of oil are present. One in use and one for cleaning, and just switch on these two as needed.
Waagene Purifier WPD-2400
"WPD-2400 is a mechanical purifier for diesel and light oil. Itcarries particles and water from the diesel fuel and maintains a very good level of purity after cleaning, depending on how many times the diesel goes through the filter bag.The WPD-2400 comes in two versions, a stationary model and a portable model. Both have the same filtration capacity 2400 liters per hour. The diesel cleaning unit is built on a solid steel chassis, or a sturdy trolley and weighs from 70 to 80 kg depending on the workmanship.On board ships, diesel is installed to suck the diesel from the storage tank and push the diesel through the filter and pump the cleaned diesel up onto the day tank. The diesel fuel passes the filter only once, and tests and measurements show that the diesel purifier removes particles and water up to 83%. By running the diesel through the filter a second time, you will get over 90% in purity of diesel.The diesel purifier is equipped with a sensor that indicates when the flow goes down and the filter bag is full or too tight to work optimally. You must then change the filter bag. Water in the diesel fuel is removed – pressed through the filter bag and collected at the bottom of the filter, which then has to be drained out."
Waagene Fuel Purifier WPD-200
The Fuel Purifiner diesel cleaner removes 95% of all particles and 98% of water. The unit has easy maintenance and is easy to use. The Fuel Purifiner can run continuously and be connected directly to the tank Waagene Filtration.
15P202QHBPKS122 HP Filter
The Parker 15P/30P Series is a compelling high-pressure, all-aluminum filter assembly, packed with diverse options. It boasts an impressive fatigue pressure rating of up to 2,000psi and an exceptional flow rate up to 45gpm.
FBO 60329 FBO-10 COAL/SEP KIT 25 Micron
Get your hands on the dynamic FBO 60329 FBO-10 COAL/SEP KIT 25 Micron. This replacement cartridge is specially crafted for FBO Filtration Assemblies. It's incredibly versatile, functioning as a water separator, silicone-treated particle extractor, and water-absorbent filter. Plus, it offers varying degrees of finesse with filter ratings of 1, 5, 10, or 25 microns.
15P210QBPKS121 HP Filter W/BYPASS
Unleash the power of Parker's 15P/30P Series - a versatile, high-pressure aluminum filter assembly designed to withstand up to 2,000psi yet fluid as a river with a capacity of 45gpm. With numerous possibilities to explore, this filter's performance is only rivalled by its durability.
15P202QHBPKS122 HP Filter W/O BYPASS
The Parker 15P/30P Series is a compelling high-pressure, all-aluminum filter assembly, packed with diverse options. It boasts an impressive fatigue pressure rating of up to 2,000psi and an exceptional flow rate up to 45gpm.
HRPV4D28M8F Rising Plug Valve - s duplex
Parker's HRPV4D28M8F Rising Plug Valve - a sleek, duplex design. Crafted meticulously for handling contaminated media, these valves flaunt a straight flow path and a soft seat tip for efficient regulation and isolation capabilities. With a top pressure rating of 10,000 psi (689 bar), they personify unmatched functionality.
931412 Filter element 40CN-1-WR PARGEL, Viton
Introducing our Viton High Efficiency 931412 Filter Element 40CN-1-WR PARGEL, a genuine and reliable replacement part crafted for Parker 15/40/80CN Series medium pressure hydraulic filters. Expect enhanced performance and maximum system efficiency with this authentic Parker product.