FT14 AND
The FT14 AND is a single direction thrust ball bearing, also known as a ball thrust bearing or axial deep groove ball bearing. It consists of a shaft ring, a housing ring, and a ball and cage assembly, with an open design suitable for high rotational speeds. These bearings can only be loaded axially in one direction, allowing for the locking of a shaft in place. They can be easily disassembled for separate mounting, but caution is necessary to avoid mixing up the shaft and housing rings during assembly.
51108 FBJ
The 51108 FBJ is a single direction thrust ball bearing, designed for high rotational speeds. It consists of a shaft ring, a housing ring, and a ball and cage assembly. This bearing is only meant to carry axial loads in one direction, and should not be subjected to radial loads. The components can be disassembled and mounted separately, but caution should be taken to avoid mixing up the shaft and housing rings during assembly. Please note that this bearing cannot compensate for misalignment between the shaft and housing due to its flat seat design.
IR111 IRB Rolamentos
The IR111 IRB Rolamentos is a single direction thrust ball bearing, featuring a shaft ring, housing ring, and a ball and cage assembly. With an open design, these bearings are suitable for high rotational speeds and can only be loaded axially in one direction. They are easily disassembled for separate mounting, but caution should be taken to avoid mixing up the shaft and housing rings during assembly.
51310 ISB
The 51310 ISB is a single direction thrust ball bearing, featuring a shaft ring, a housing ring, and a ball and cage assembly with an open design suitable for high rotational speeds. These bearings can only handle axial loads in one direction and should not be loaded radially. They are easy to disassemble for separate mounting, but caution should be taken to avoid mixing up the shaft and housing rings. Please note that the flat seat on the housing ring of the 51310 ISB means that it cannot compensate for misalignment between the shaft and housing.
51310 ISB
The 51310 ISB is a single direction thrust ball bearing, designed for high rotational speeds. It consists of a shaft ring, housing ring, and ball and cage assembly. This open-design bearing locks the shaft in one direction and should not be loaded radially. It can be disassembled for separate mounting of components, but be cautious not to mix up the shaft and housing rings during assembly. The flat seat of the housing ring does not compensate for shaft and housing misalignment.
51112A ZKL
The 51112A ZKL is a single direction thrust ball bearing, ideal for high rotational speeds. Its open design and ball and cage assembly make it suitable for axial loads in one direction, while caution should be taken not to load it radially. Its disassemblable components allow for easy mounting, but it's important to keep the shaft and housing ring separate during assembly. Note that this bearing cannot compensate for shaft and housing misalignment due to its flat seat housing ring.
51108 ISB
The 51108 ISB is a single direction thrust ball bearing, also known as a ball thrust bearing or axial deep groove ball bearing. It consists of a shaft ring, a housing ring, and a ball and cage assembly, suitable for high rotational speeds. This type of bearing can only accommodate axial loads in one direction, allowing for locking of the shaft in place. It features an open design and can be easily disassembled for separate mounting. However, it should be noted that the 51108 ISB cannot compensate for misalignment between the shaft and housing due to its flat seat on the housing ring.
51111 ISB
The 51111 ISB is a single direction thrust ball bearing, consisting of a shaft ring, housing ring, and ball and cage assembly. Ideal for high rotational speeds, it allows axial loading in one direction. It features a disassemble design for easy mounting but does not compensate for shaft and housing misalignment.
51108 ISB
The 51108 ISB is a type of single direction thrust ball bearing, designed with an open structure and suitable for high rotational speeds. This bearing consists of a shaft ring, housing ring, and ball and cage assembly, and can only be loaded axially in one direction. It is essential to avoid radial loading. The bearing is disassemblable for easy mounting, but caution must be taken to correctly assemble the shaft and housing rings. Please note that the flat seat of the housing ring does not allow for compensation of misalignment between the shaft and housing.
51111 ISB
The 51111 ISB is a single direction thrust ball bearing, designed for high rotational speeds. It consists of a shaft ring, housing ring, and ball and cage assembly. It can only be loaded axially in one direction and is not suitable for radial loads. Its open design allows for easy disassembly and separate mounting of components. Note that the housing ring has a flat seat, limiting its ability to compensate for misalignment.
51226M FLT
The 51226M FLT is a single-direction thrust ball bearing, featuring a shaft ring, housing ring, and ball and cage assembly. With an open design, these bearings are suitable for high rotational speeds. They can only be loaded axially in one direction, effectively locking the shaft in place. As they are disassemblable, the components can be easily mounted separately, but caution should be taken to not mix up the shaft and housing rings during assembly. Additionally, note that this bearing cannot compensate for any misalignment between the shaft and housing due to its flat seat design.
51317 URB
The 51317 URB is a single direction thrust ball bearing, also known as a ball thrust bearing or an axial deep groove ball bearing. It consists of a shaft ring, a housing ring, and a ball and cage assembly, with an open design suitable for high rotational speeds. These bearings can only be loaded axially in one direction, locking the shaft in place, and must not be loaded radially. The components are easily disassembled and mounted separately, but be careful not to mix up the shaft and housing ring during assembly. The housing ring has a flat seat, so the bearing cannot compensate for any misalignment between the shaft and housing.
51101 SBC
The 51101 SBC is a single direction thrust ball bearing, also known as a ball thrust bearing or axial deep groove ball bearing. It features a shaft ring, a housing ring, and a ball and cage assembly in an open design, making it suitable for high rotational speeds. These bearings can only be loaded axially in one direction, allowing the shaft to be locked in that direction. The components can be easily disassembled and mounted separately, but caution must be taken to avoid mixing up the shaft and housing ring during assembly. It has a flat seat housing ring, so it cannot compensate for shaft and housing misalignment.
F4-9 EZO
Introducing the F4-9 EZO, a single direction thrust ball bearing also known as a ball thrust bearing or axial deep groove ball bearing. This open design bearing consists of a shaft ring, housing ring, and ball and cage assembly, perfect for high rotational speeds. It can only be loaded axially in one direction, effectively locking a shaft in place. When disassembled, components can be easily mounted separately, but caution should be taken not to mix up the shaft and housing ring during assembly. The shaft ring rotates with the shaft, while the housing ring has a slightly larger bore diameter to allow clearance for the shaft to pass through.
51310 BGR
The 51310 BGR is a single direction thrust ball bearing, designed for high rotational speeds. It features a shaft ring, housing ring, and a ball and cage assembly. This bearing is great for locking a shaft in one direction and should only be loaded axially, not radially. The components are easily mountable and disassemblable, but be sure not to mix up the shaft and housing ring during assembly. Keep in mind that this bearing cannot compensate for any misalignment between the shaft and housing due to its flat seat.
51138M Rollway
The 51138M Rollway is a single direction thrust ball bearing, designed for high rotational speeds. It consists of a shaft ring, housing ring, and ball and cage assembly, with an open design. This bearing can only support axial loads in one direction, and should not be loaded radially. Its disassemblable components can be mounted separately, but be cautious not to mix up the shaft and housing ring during assembly. The flat seat design of the housing ring means that this bearing cannot compensate for misalignment between the shaft and housing.