Photoluminescent Aluminum Running Man Directional Sign ILUM-RM-AL

The Ecoglo® RM Standard Series Photoluminescent Exit Signs are the favored solution to ensuring that your facility is equipped with the safest backup technology in an emergency. With no electricity or battery required, our code compliant photoluminescent exit signs will illuminate your path after being charged by natural or artificial light. If requested, the RM Standard Series signs come with a clear anodized aluminum frame and a universal mounting kit that guarantee the most efficient installation procedure for any location. Ecoglo Photoluminescent RM standard series signs are rugged, require no electricity, reduce maintenance costs and as a result, provide the lowest life cycle costs available for an exit sign. RM Series is sign face only. Mounting kits available upon request at additional charge. Signs are 8″ W x 4.6″ H. IBC/IFC Compliant. Benefits and Technical Details Ecoglo R_02012 meets or exceeds the performance criteria specified in the following tests or standards: Brightness: High visibility in dark or light conditions. ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings. DIN 67510 Part 1, Phosphorescent Pigments and Products: Measurement and identification by the manufacturer. ISO 17398:2004 Clause 7.11, Safety Colors and Safety Signs- Classification, Performance and Durability of Safety Signs. UV Stability: High durability indoors and outdoors. ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials. Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus. Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling Abrasion Resistance: Hard wearing. ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion. ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method. JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test. Washability: Easy Cleaning. ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings. Radioactivity: No radioactivity or toxicity. ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity. Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test. Flammability​: Does not burn. ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source. ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position. FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.