MiniBOOSTER Hydraulic Intensifier HC3-3.2-A-C
MiniBOOSTER Hydraulic Intensifier HC3-5.0-A-C

MiniBOOSTER Hydraulic Intensifier HC3-4.0-A-C

Contact us for Pricing
Category: Tag:
  • Payment by invoice possible
  • Not currently in stock, contact us for factory lead times
  • Payment by invoice possible
  • In stock at factory, ready to ship in estimated 1-2 weeks, contact us for expedited options
  • Del Rey is proud to be the exclusive distributor of Waagene products
  • Payment by invoice possible
  • Low quantities typically kept on hand; please contact us for availability at lead time
  • Authorized MiniBOOSTER distributor & hydraulic excellence partner

Product Description

The HC3 – 4.0 – A – C, a variant of the HC3, is used for applications with larger flow rates, providing a fast response with build-in by-pass up to 50 l/min. It is a compact unit weighing only 4.0 kg/ 8.8 lbs, designed for use in NG6 (D03) stacking manifold systems. Maximum outlet pressure is 500 bar in standard versions. An adjustment of the outlet pressure is carried out by varying the supplied pressure.

Additional information

Product specification

  • HC3-C versions: 15 different intensification factors.
  • PIN: 20 – 207 bar.
  • PH: 500 bar maximum.
  • PRETURN: As low as possible (return pressure to tank).
  • POUTLET: PH = (PIN – PRETURN) x intensification factor.
  • Mounting: NG6 (D03) stacking manifold system.
  • Weight: 4.0 kg/ 8.8 lbs.

Model versions

  • A model = no dump valve.
  • G model = direct proportionally controlled.

Material certificate 4.0 on request

Flow Rates

Intensification Factor i Max.Intensified Outlet flow i/min Max. Inlet flow i/min
1.2 3.5 8.0
1.5 4.2 12.0
2.0 3.2 12.0
2.2 2.9 12.0
2.5 2.7 13.0
2.8 2.5 13.0
3.2 2.5 15.0
4.0 2.0 14.0
5.0 1.6 14.0
6.6 1.3 13.0
9.0 0.9 13.0
13.0 0.6 12.0
16.0 0.5 12.0
20.0 0.3 12.0
25.0 0.2 12.0

Function description

When pump pressure is reached on the A port, check valve (b) will close and the oil will flow via the Orifice (a) to the oscillating pump unit OP. The end pressure will be achieved by the oscillating pump OP. The unit will automatically stall when end pressure on high-pressure side is reached. If a pressure drop on high-pressure side exists due to consumption or leakage, the OP valve will automatically operate to maintain the end pressure.

Function diagram

Function-Diagram HC3-4.0-A-C

Dimension

Dimension drawing HC3-4.0-A-C

Ordering an HC3-C

Ordering example of an HC3-C with i = 4.0: HC3 – 4.0 – A – C

Attention note!

      • Dynamic – low hysteresis: Ordering example of an HC3 with i = 4.0 RV incorporated: HC3 – 4.0 – A – C.
      • Fail safe – high hysteresis: The RV valve opening ratio is to be determined on individual basis. Contact our technical support.

Model

  • HC3

Intensification,i

  • Select factor
  • See flow rate table

Model Version.

  • Select type
  • A = without DV
  • G = with proportional valve

Connections.

  • C