Hatteland (Rolls Royce) JH 19T12 MMD Marine Display
- Payment by invoice possible
- Not currently in stock, contact us for factory lead times
- Payment by invoice possible
- In stock at factory, ready to ship in estimated 1-2 weeks, contact us for expedited options
- Del Rey is proud to be the exclusive distributor of Waagene products
- Payment by invoice possible
- Low quantities typically kept on hand; please contact us for availability at lead time
- Authorized MiniBOOSTER distributor & hydraulic excellence partner
Product Description
The product is a 19.0 inch Maritime Multi Display (MMD), Series 1, model JH 19T12 MMD-xxx-Axxx, designed for enhanced maritime operations. It features a high-quality SHARP TFT display with MVA Premium™ Technology, offering improved reliability through fewer cable connections and the flexibility of AC or DC power input. The display supports multiple signal inputs and outputs, including DVI-I, RGB, and USB I/O, with options for Picture-By-Picture (PBP) and Picture-In-Picture (PIP) functionality. ECDIS compliant models are available, and all models can include optical bonding technology to prevent screen misting.
Additional information
Product Specification – JH 19T12 MMD
TFT Technology
- High Quality SHARP TFT.
- 19.0 inch viewable image size.
- Active Matrix, Thin Film Transistor (TFT).
- MVA Premium™ Technology.
TFT Characteristics
| Pixel Number | 1280 x 1024 |
| Pixel Pitch (RGB) | 0.294 (H) x 0.294 (V) mm |
| Response Time | 15 ms (typical), “black” to “white” |
| Contrast Ratio | 700:1 (typical) |
| Light Intensity | 300 cd/m2 (typical) |
| Viewable Angle | +/- 85 deg. (typical) (Up/Down/Left/Right) |
| Active Display Area | 376.32 (H) x 301.056 (V) mm |
| Max Colors | 16.7 millions |
Synchronisation
Sync Signal:
- Digital separate synchronisation.
- Composite synchronisation.
- Synchronisation on green..
- Auto detects VGA -> WUXGA, interlaced and non interlaced.
Video Signal
- Analog RGB 0,7Vp-p
- Input Impedance 75 Ohm.
Synchronisation Range:
- Horizontal : 15,0 kHz to 91,1 kHz.
- Vertical : 60 Hz* to 85 Hz.
Supported Signals
Resolutions:
| VGA | 640 x 480 (including 640 x 350) |
| SVGA | 800 x 600 (including 720 x 400) |
| XGA | 1024 x 768 |
| SXGA | 1280 x 1024 |
| UXGA | 1600 x 1200 |
| WUXGA | 1920 x 1200 |
* Recommended for optimum picture quality. (60 Hz only)
Video Signals (with HATTELAND® Multifunction Cable):
- Interlaced NTSC and PAL/SECAM video.
- Composite video.
Power Specifications
Power Supply:
| 115& 230VAC – 50 / 60Hz | – JH 19T12 MMD-Axx-xxxx |
| 24 VDC | – JH 19T12 MMD-Dxx-xxxx |
Power Consumption:
| Operating | 100 W (max) |
Typical Type Numbers
| JH 19T12 MMD-AA1-AAAA | Standard AC, Keypad controls only |
| JH 19T12 MMD-DA1-AAAC | Standard DC & Capacitive Touch Screen |
Physical Considerations
-
-
- 483 (W) x 444 (H) x 82 (D) mm / 19.02″ (W) x 17.48″ (H) x 3.23″ (D).
- Weight: 11.50 kg (approx).
-
Signal Terminals
| DVI-I Signal IN | 1 x 29p DVI Female (or as RGB IN with adapter) |
| RGB Signal IN | 1 x 15p HD D-SUB (female) |
| RGB Signal OUT | 1 x 15p HD D-SUB (female) – Clone of RGB IN |
| Multifunction | 1 x 160p D-SUB (female) – Also see table below |
| USB I/O | 1 x TYPE B Conn. (female) Reserved for future use(typical) |
| AC Power IN | 1 x Std IEC Inlet |
| AC Power OUT | 1 x Std IEC Outlet |
| AC Power OUT | 1 x 2p D-SUB Connector (male) – Amphenol FCC17 |
Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the RGB input. The output is working even if the display unit is turned off, but power cable/supply must be connected/provided.
HATTELAND® Multifunction Cable
The factory standard cable is delivered with the following connectors. 2 Standard cables are defined. Standard cable length is 30cm.
| COM1 | 1 x 9p D-SUB (female) – RS232 |
| Composite Video IN | 3 x BNC (female) |
| COM Touch | 1 x 9p D-SUB (female) – For touch screen |
Customized cables are possible to support more built-in signals, like: RS-232,
RS-485, RS-422/RS-485, Buzzer, ON/OFF, Touch (RS-232 or PS/2), 1 x S-Video IN, 3 x
Composite Video IN, Remote External User Controls, Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths can be manufactured.
User Controls
On front bezel – Keypad control (IP66) xxx-xxAx models:
- Power On/Off and On Screen Display Menu (push button).
- Brightness Control (up/down – push buttons).
- Hotkeys (left/right – push buttons).
- Mode Status Red/Green Illuminated LED-Ring Indicator.
Available Accessories
| Cables | Custom Multifunction Cable to support more signals |
| JH MMD BR | Bracket (Review bracket datasheet/user) |
| JH 19BRD STD-A1 | Mounting Bracket EN60945 Tested |
| JH MMDROSTD-A1 | Rotary Bracket (Review bracket datasheet/manual) |
| JH 19TSV STD-A1 | Sun Visor (Review user manual) |
| JH VESA 18T04 | Vesa Bracket (Review user manual) |
| JH 19TAP STD-A1 | 19″ to 21″ CRT Adapter frame (Review user manual) |
| JH 19TWC STD-B1 | Water Cover (Review user manual) |
Factory Options
- Resistive* or Capacitive Touch Screen / Optical Technology Bonding.
*Note that all 19 inch with resistive touch screens can not be combined with bonding.
