MiniBOOSTER Hydraulic Intensifier HC7-13.0-G

Product successfully added to the Quote List

Product Description

The HC7 – 13.0 – G is a remarkably compact high-pressure unit, weighing just 1.5 kg yet capable of delivering pressures of up to 2,000 bar. Designed for portable applications such as power packs, it efficiently elevates supplied pressure to a higher outlet pressure while automatically adjusting for oil consumption to sustain the desired high pressure. Outlet pressure adjustment is achieved by modifying the supplied pressure. With adaptable high-pressure adapters, various thread types can be accommodated, starting from the M22x1.5 thread in the HP port. Higher pressure options are also available upon request.

Additional information

Product Specifications

HC7 versions: 10 different intensification factors
PIN: 20 – 207 bar
PH: 2,000 bar maximum
PRETURN: As low as possible (return pressure to tank)
POUTLET: PH = (PIN – PRETURN) x intensification factor
Mounting: Inline tube
Weight: 1.5 kg

Model Versions:

A model = no dump valve
B model = with dump valve
B model = direct proportionally controlled

Material certificate 3.1 on request

Flow Rate

i (Intensification factor)	Max. intensified outlet flow (l/min)	Max. inlet flow (l/min)
4.0	2.0	14.0
5.0	1.6	14.0
6.6	1.3	13.0
7.6	1.1	13.0
9.0	0.9	13.0
10.3	0.8	12.0
13.0	0.6	12.0
16.0	0.5	12.0
20.0	0.3	12.0
25.0	0.2	12.0

Functions Desctiption

This system utilizes a directional valve (CV) to regulate the flow of oil, allowing it to pass through check valves (KV1, KV2, and DV) to reach the high-pressure side (H). Initially, maximum flow through the booster is attained for rapid forward motion. Once pump pressure is attained on the high-pressure side, the valves (KV1, KV2, and DV) close. The oscillating pump unit (OP) then maintains the end pressure automatically, stalling when the desired pressure is reached. Should there be a pressure drop due to consumption or leakage, the OP valve adjusts accordingly to uphold the end pressure.

Function Diagram

Function Diagram HC7-13.0-G

Dimensions

Dimension drawing HC7-13.0-G

Connection Types

Connection	IN / R	H
1	1/4″ BSPP	M22 x 1.5
2	7/16-20″ UNF	M22 x 1.5

High-pressure adapters

Ordering an HC7

Ordering example of an HC7 with i = 13.0, H1 M22 x 1.5 and H2 9/16-18 UNF, DV incorporated and BSPP connections: HC7 – 13.0 – B – 12

Attention note!

High-pressure adapter is required, please specify ordering code – see high-pressure adapter table.
High-pressure adapters will be factory mounted.

The G-model is available in 2 variants, when ordering please specify accordingly:

Dynamic – low hysteresis: Ordering example of an HC7 with i = 13.0 RV incorporated, H1 M22 x 1.5 and H2 9/16-18 UNF and BSPP connections: HC7 – 13.0 – G – 12.
Fail safe – high hysteresis: The RV valve opening ratio is to be determined on individual basis. Contact our technical support. Ordering example of an HC7 with i = 13.0 RV with opening ratio x.x incorporated, H1 M22 x 1.5 and H2 9/16-18 UNF and BSPP connections: HC7 – 13.0 – G – x.x – 12 .

Model

Intensification,i

Select factor
See flow rate table

Model Version.

Select type
A = without DV
B = with DV
G = with proportional valve

Connections.

Select thread
See table below

Ordering code	IN / R	H1	H2	H3	H4
HC7-___-__-11	1/4″ BSPP	M22 x 1.5	–	–	–
HC7-___-__-21	7/16-20 UNF	M22 x 1.5	–	–	–
HC7-___-__-12	1/4″ BSPP	M22 x 1.5	9/16-18 UNF	–	–
HC7-___-__-22	7/16-20 UNF	M22 x 1.5	9/16-18 UNF	–	–
HC7-___-__-13	1/4″ BSPP	M22 x 1.5	9/16-18 UNF	9/16-18 UNF	–
HC7-___-__-23	7/16-20 UNF	M22 x 1.5	9/16-18 UNF	9/16-18 UNF	–
HC7-___-__-14	1/4″ BSPP	M22 x 1.5	9/16-18 UNF	9/16-18 UNF	9/16-18 UNF
HC7-___-__-24	7/16-20 UNF	M22 x 1.5	9/16-18 UNF	9/16-18 UNF	9/16-18 UNF

Max. Tightening Torque BSPP

	IN / R
	1/4″ BSPP
with steel washer	4.0 da/Nm
with cutting edge	4.0 da/Nm

Max. tightening torque flange mounting

		7/16-20″UNF
	With O-ring	2.0 da/Nm

Call Us Now

MiniBOOSTER Hydraulic Intensifier HC7-13.0-G