MiniBOOSTER Hydraulic Intensifier HC63-2.5-B
- Payment by invoice possible
- Not currently in stock, contact us for factory lead times
- Payment by invoice possible
- In stock at factory, ready to ship in estimated 1-2 weeks, contact us for expedited options
- Del Rey is proud to be the exclusive distributor of Waagene products
- Payment by invoice possible
- Low quantities typically kept on hand; please contact us for availability at lead time
- Authorized MiniBOOSTER distributor & hydraulic excellence partner
Product Description
The HC63 – 2.5 – B is a compact high-flow unit, delivering up to 64.5 l/min on the high-pressure end. Similar to other miniBOOSTER models, it elevates supplied pressure to maintain a constant high outlet pressure, adjusting as oil is consumed. Weighing just 60.0 kg, it offers versatility with optional HP flange mounting and the ability to connect multiple units for increased flow capacity.
Additional information
Product Specifications
- HC62 versions: 9 different intensification factors
- PIN: 20 – 207 bar
- PH: 800 bar maximum
- PRETURN: As low as possible (return pressure to tank)
- POUTLET: PH = (PIN – PRETURN) x intensification factor
- Mounting: Inline tube / HP-flange mounting (optional)
- Weight: 55.0 kg
Model Versions:
- A model = no dump valve
- B model = with dump valve
- B model = direct proportionally controlled
Material certificate 3.1 on request
Flow Rate
| Intensification factor (i) | Max. intensified outlet flow (l/min) | Max. by-pass pump flow (l/min) |
|---|---|---|
| 1.2 | 64.5 | 225.0 |
| 1.5 | 55.5 | 225.0 |
| 2.0 | 48.0 | 225.0 |
| 2.5 | 39.0 | 225.0 |
| 3.3 | 33.0 | 225.0 |
| 4.0 | 27.0 | 225.0 |
| 4.9 | 21.0 | 225.0 |
| 6.3 | 16.5 | 225.0 |
| 8.2 | 13.5 | 225.0 |
Functions Desctiption
The operational process is depicted in the function diagram. Initially, oil flows through the directional valve CV to the IN port, passing through check valves KV1, KV2, and DV to the high-pressure side H, ensuring maximum flow through the booster for fast-forward function. Upon reaching pump pressure on the high-pressure side H, valves KV1, KV2, and DV close. The oscillating pump unit OP maintains end pressure automatically, halting when the desired pressure is achieved. In the event of pressure drop due to consumption or leakage, the OP valve adjusts to sustain the end pressure.
Function Diagram B-model
Dimensions
Connection Types
| Connection | P / T | H / Z |
|---|---|---|
| 1 | 1″ BSPP | 1″ BSPP |
Ordering an HC63
Ordering example of an HC63 with i = 4.0, DV incorporated and BSPP connections: HC63 – 4.0 – B – 1
Attention note!
The G-model is available in 2 variants, when ordering please specify accordingly:
- Dynamic – low hysteresis: Ordering example of an HC63 with i = 4.0 RV incorporated and BSPP connections: HC63 – 4.0 – G – 1.
- Fail safe – high hysteresis: The RV valve opening ratio is to be determined on individual basis. Contact our technical support. Ordering example of an HC62 with i = 4.0 RV with opening ratio x.x incorporated and BSPP connections: HC63 – 4.0 – G – x.x – 1.
Model
- HC62
Intensification,i
- Select factor
- See flow rate table
Model Version.
- Select type
- A = without DV
- B = with DV
- G = with proportional valve
Connections.
- Your selection
- 1
Max. Tightening Torque BSPP
| P / T | H / Z | |
| 1″ BSPP | 1″ BSPP | |
| with steel washer | 33.0 da/Nm | 33.0 da/Nm |
| with cutting edge | 33.0 da/Nm | 33.0 da/Nm |
Max. tightening torque flange mounting
| Mounting bolt | ||
| M10 8.8 | 5.0 da/Nm |
